DAYA BUMIMAJU SDN. BHD.

Products & Services

Technology Specialization

Engineering Services

Engineering Supplies & Leasing

Perkins 1104C Zone 2 Powerpack

Sludge & Tank Cleaning, Oil Recovery

We employ high-volume, low-pressure water to clean tank from the outside if the levels of vapors inside require it. Using high-volume trucks with lances attached, our reach capability into the tank is approximately 50 feet. This allows us to quickly and safely flush the tank, remove flammable liquids and move the sludge to a pick-up point.

Upon entry, the stream is split between two lances and the tank is quickly and thoroughly cleaned. To reduce the volume of water required, we use a unique micron-filtration system that allows us to filter the water generated and reuse it in the cleaning process. Doing this drastically reduces the amount of water used and contributes to the overall cost-effectiveness of the project.

Desludging is the first process in the cleaning of the tank and this is where most of the oily sludge from the tank is removed. The desluding process may begin when the oxygen level has fallen below 8 per cent. The nozzles are operated one at a time, alternating between all of the nozzles supplied with the system. Since the sludge may contain solids, water and trapped, liquefied oil it may be necessary to add cutter stock to re-liquefy the sludge.

Note: Click to enlarge below images

Technology Specialization

Engineering Supplies & Leasing

Engineering Services

Industrial Equipment Specialization

Industry Applications